Hall No.
A1072

Product Detail

  • Bearing No. :

    7000C

  • Boundary dimensions(mm)

  • d :10

  • D :26

  • B :8

  • Basic load ratings(kN)

  • Dynamic(Cr) :4.9

  • Static(Cor) :2.1

  • Limiting speed(rpm )

  • Grease :24000

  • Oil :32000

  • Mass:0.019 kg


Angular contact bearings have one ring shoulder partially or totally removed. This allows a larger ball complement than found in comparable deep groove bearings, hence a greater load capacity. Speed capability is generally higher along with greater rigidity and accuracy. Angular contact bearings are assembled to a contact angle by varying the radial clearance. The smaller angle delivers better radial capacity and rigidity, the larger angle is better for axial rigidity. Separable and nonseparable types are readily available.


UEuKEG83TfWPyLCFrH0N2Q.jpg_135xa.jpg


imqXZIR8TP-N7WRZiW51Hg.jpgnzyTjalqS8q0rqefPMWWAw.jpg

-aJWlZivTXaQmIJJDe_5vA.jpgJ4zFQliOSxyWLD3bLxgdJw.jpgKFiQOfPhTVyBY31fkUS8lg.jpg






Technical Support
CBCC(China Bearing Commercial Community) BearingNet The Bearing Distributor Network
Contact Us
Follow Us
Subscribe
Copyright ® 2021 China Bearing Expo(Online) All Rights Reserved www.bearingshow.net